![]() ![]() Assemble all the parts and stain the cabinet.Ĭlick for more details 9. Then, start assembling the side frames of the cabinet, after that, move to the shelves. Make a cutting list for the cabinet so that you won't misplace any pieces during the project. The materials needed for this DIY cabinet include veneer plywood, pine board, Kreg jig, Kreg Rip-cut, wood stain, polyurethane, circular saw, miter saw, brand nailer, drill, and impact driver. Prepare the pieces for the door and sand the pieces down.Ĭlick for more details 8. Measure and cut the plywood to size then assemble the frame and attach cleats to the index and outside of the frame then, cover the back with pieces of plywood. When inserting the pocket hole make sure the screws are hiding in such a way that it is not visible from the outside.Ĭlick for more details 7. DIY Storage CabinetĬut the plywood to size then start joining each part of the cabinet with pocket holes. Assemble the frame and join them together with screws.Ĭlick for more details 6. Cut the plywood to pieces then drill pocket holes on them. The materials needed for this storage include plywood, baseboard trim, cove molding, shelf pins, glue, and screws. ![]() See also 25 DIY Dresser Ideas: How To Build A Dresser Like A Pro 5. Cut and attach the braces inside the cabinet frame then screw one long piece of wood to the center of the braces to divide the shelf into two. Start by gathering the four sides of the cabinet, join them with screws and attach the back pieces to cover one side of the frame. Cut and gather the pieces, then pass them through the router to make a grove where the piece is joined together. To make this tall storage cabinet, you needed to cut and assemble the pieces for the cabinet frame first. Then, start by joining the frame for the cabinets with pocket hole screws and drill, then, assemble the drawer and other components. Cut all the pieces needed for the project and sand them down before you start to assemble them. This is made from plywood, wood glue, pocket hole screws, table saw, wood glue, pocket hole screws, drill, and tape measure. Then, assemble other parts and you're good to go. After this, assemble the base and join them with a pocket hole jig. Start by making a cutting list, measure, and cut the pieces of wood needed for the project. The materials needed for this DIY storage cabinet include wood, wood glue, wood screws, pocket hole jig, table saw, and tape measure. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |